Siemens SIPROCESS GA700 Operating Instructions Manual page 77

Overview
A
①
②
③
④
⑤
Figure 8-4
Procedure
1. Plug the signal cables into the associated sockets on the device rear in accordance with the
connection assignment.
2. Screw the signal cables tight to prevent them from falling out.
3. Plug the Ethernet cable into the socket
You can find additional information on the setting of optional modules or MODBUS TCP using the
list of references in the following documentation:
• Operating manual LUI (Page 135)
• Operating manual PDM (Page 135)
Rack-mounted device
Operating Instructions, A5E31874006-12
Detail view of option module connections
OM1.1 and OM2.1/2.2 with embossed connector numbers on the housing's rear panel
Power supply unit
Processing unit, Ethernet (MODBUS TCP), and 37-pin sub-D (female), digital inputs and outputs
Optional module 1.1 25-pin sub-D (female), digital inputs and outputs
Optional module 2.1, 15-pin sub-D (male), digital outputs and analog outputs or
Optional module 2.2, 15-pin sub-D (female), digital inputs, analog inputs and analog outputs
Backplane of a rack-mounted device, connecting signal/Ethernet cables
③
.
Connecting
8.2 Electrical connections
77