Spare Parts/Accessories; Notes - Siemens SIPROCESS GA700 Operating Instructions Manual

Appendix
A.5 Spare parts/accessories
A.5

Spare parts/accessories

A.5.1

Notes

Danger for operating personnel/device failure
All spare parts in the spare parts lists are listed with the classifications "1", "2" or "*" and are
available for order. This classification indicates a permission for use. You must therefore note
the following:
• The use of Class 2 spare parts is allowed only after appropriate training provided by Siemens
• The general information contained in this document apply to qualification for Class 1 spare
• For the spare parts marked with *) we do not recommend repair on site. Instead, you should
You can obtain additional information about this from your Siemens contact
Siemens contact (https://www.automation.siemens.com/partner)
Note
Completeness/timeliness of spare parts lists
The following spare parts lists were correct at the time this documentation was issued. Interim
changes or updates are not included. You can find information about the latest spare parts in the
catalogs and on the Internet. If necessary contact your Siemens contact at:
Siemens contact (https://www.automation.siemens.com/partner)
See also
Contact partner (https://w3.siemens.com/aspa_app/)
138
WARNING
AG.
The use of Class 2 spare parts without prior training has the following consequences:
– The device can fail completely and can thus become a danger for the operating
personnel.
– The device can lose its measuring capability.
– Each of these cases voids the manufacturer warranty of the device/module.
parts. Additional training by Siemens AG is not required.
send in the device for repair to our Repair Center as repair on site may void the technical
specifications.
Rack-mounted device
Operating Instructions, A5E31874006-12