Rack-Mounted Housing Tool; Cables - Siemens SIPROCESS GA700 Operating Instructions Manual

Installing/removing and connecting analyzer and option modules

7.3 Cables

7.2

Rack-mounted housing tool

The following tools are required for the mounting/removal of the analyzer modules in the rack-
mounted housing:
Table 7-1
Name
Screwdriver
Hexagon socket wrench
Torque wrench 0.2 to 2.5 Nm
7.3 Cables
Overview
Each analyzer module has a cable set. The CAN BUS cable which interconnects all components
always has the full range of connections.
The enclosure contains plastic retainers that are used to fasten the cables. The flat cables and
ribbon cables are laid separate from each other in the enclosure and fastened with cable ties to
plastic retainers.
①
②
Figure 7-1
56
Rack-mounted housing tool
Torx T20
Torx T10
SW7
SW5
Ribbon cable
Power cable
Wiring and cabling
Quantity
1
1
1
1
1
Rack-mounted device
Operating Instructions, A5E31874006-12