Call Waiting / Camp On - NEC Xen Topaz Features And Specifications Manual

XEN Topaz

Call Waiting / Camp On

• Description
With Call Waiting, an extension user may call a busy extension and wait in line (Camp-
On) without hanging up. When the user Camps-On, the system signals the busy
extension with two beeps indicating the waiting call. The call goes through when the
busy extension becomes free. Call Waiting helps busy extension users know when
they have additional waiting calls. It also lets callers wait in line for a busy extension
without being forgotten.
Conditions
None
Default Setting
Enabled.
• Programming
• Related Features
• Operation
To Camp-On to a busy extension:
1. Call busy extension.
2. Dial 850 or Press Camp-On key (PGM 15-07 or SC 851: 35).
Features and Specifications Manual
11-12-47: Service Code Setup (for Service Access) - Call Waiting Answer /
Split Answer for SLT
If required, use this program to change the code users dial to Split while
on a call. This code is normally 894.
15-07-01: Programming Function Keys
Assign a function key for Camp-On (code 35). This key is also the Call-
back key.
20-18-06: Service Tone Timer - Call Waiting Tone Timer
Use this option to set the interval between Call Waiting tones. This timer
also sets the interval between Off Hook Signalling alerts.
• Callback
If an extension user Camps-On and then hangs up, the system converts the
Camp On to a Callback.
• Off Hook Signalling
The Off Hook Signalling Enhancements give an extension the ability to block a
caller from dialling 804 to Camp On and/or DID callers from automatically camp-
ing on.
• Programmable Function Keys
Function keys simplify Call Waiting/Camp On operation.
• Transfer
An extension user may be able to Transfer a call to a busy extension.
• Trunk Queuing/Camp-On
Trunk Queuing lets an extension user Camp-On to a trunk.
NEC Business Solutions Ltd
Chapter 4 - 89