Trunk Group Routing - NEC Xen Topaz Features And Specifications Manual

NEC Business Solutions Ltd

Trunk Group Routing

• Description
Trunk Group Routing sets outbound call routing options for users that dial the Trunk
Group Routing code (0) for trunk calls. Trunk Group Routing routes calls in the order
specified by system programming. If a user dials 0 and all trunks in the first group are
busy, the system may route the call to another group.
Conditions
None
Default Setting
Enabled. All trunks are in Group 1.
• Programming
Chapter 4 - 326
11-01-01: System Numbering
Set up a Service Code for Alternate Trunk Route Access.
11-09-01: Trunk Access Code
If required, change the single-digit Trunk Access Code (normally 0). If
you change this code, you must also review the settings in 11-01 for the
new code selected.
11-09-02: Trunk Access Code - Alternate Trunk Route Access Code
Assign the Service Code set up in 11-01 for Alternate Trunk Route
Access.
14-05-01: Trunk Groups
Assign trunks to trunk groups (1-25).
14-06-01: Trunk Group Routing
Set up an outbound routing table (1-25) for trunk groups assigned in Pro-
gram 14-05.
14-07-01: Trunk Access Map Setup
Access Map programming may limit Trunk Group Routing options.
15-06-01: Trunk Access Map for Extensions
Access Map programming may limit Trunk Group Routing options.
15-07 : Programming Function Keys
Assign a function key for Trunk Group Routing access (code *02 + trunk
group 01-25).
21-02-01: Trunk Group Routing for Extensions
Assign the routes set in Program 14-06 to extensions.
21-03-01: Trunk Group Routing for Trunks
Assigns the routes set in Program 14-06 for use with Automatic
Extended Call Forward.
21-15-01: Alternate Trunk Route for Extensions
Designate the trunk route accessed when a user dials the Alternate
Trunk Route Access Code assigned in Program 11-09-02. Trunk Group
Routing is set up in Program 14-06.
XEN Topaz
Features