Caller Id Sending - NEC Xen Topaz Features And Specifications Manual

XEN Topaz

Caller ID Sending

• Description
Caller ID sending allows the XN120 to send the calling party's telephone number
(CGPN) for outgoing ISDN calls.
The CGPN is passed on by the Network provider to the called party.
Note - You may need to request this service with the ISDN Network provider.
The CGPN number can be set for each trunk and/or each extension, when both are set
the extension will take priority over the trunk CGPN.
Conditions
This service may be restricted by the Network provider.
Default Setting
CLIP sending is enabled.
There are no entries for trunk or extension CLIP.
• Programming
Features and Specifications Manual
10-03-05: CLIP Information Sending - enable/disable for each ISDN BRI
circuit
15-01-04 : CLIP Information Sending - enable/disable for each extension
20-08-13 : CLIP Information Sending - enable/disable per COS
22-12-01 : ISDN Trunk CLIP - enter the CGPN to be sent for each ISDN trunk
20-13-01 : Extension CLIP- enter the CGPN to be sent for each extension
NEC Business Solutions Ltd
Chapter 4 - 99