Handsfree And Monitor - NEC Xen Topaz Features And Specifications Manual

NEC Business Solutions Ltd

Handsfree and Monitor

• Description
Handsfree allows a system phone user to process calls using the speaker and
microphone in the telephone (instead of the handset). Handsfree is a convenience for
workers who don't have a free hand to pick up the handset. For example, a terminal
operator could continue to enter data with both hands while talking on the phone.
The system provides three variations of Handsfree operation:
Conditions
Default Setting
Enabled.
• Programming
• Related Features
Chapter 4 - 180
Handsfree
Automatic Handsfree
Monitor
A. Keysets are half-duplex which may cause the speaker to turn off (clip) during con-
versations, giving preference to the outside party.
B. Handsfree operation during outside trunk calls is only supported by display-type
system phones/
20-06-01: Class of Service for Extensions
Assign Class of Service (1-15) to extensions.
• Central Office Calls, Answering / Central Office Calls, Placing
Extensions should be programmed for incoming and outgoing access, ringing,
etc.
• Handsfree Answerback
Answer Intercom calls without lifting the handset - just speak toward the phone.
• Microphone Mute
For privacy, mute the phones microphone while on a call.
• Single Line Telephones
Automatic Handsfree and Monitor are not available to single line telephones.
• Prime Line Selection
Prime Line Selection affects how incoming and outgoing calls are handled and
thus determines what happens when the user presses the SPK key.
User can place and answer calls by pressing
SPK instead of using the handset.
User can press a line or line appearance key
without first lifting the handset or pressing SPK.
An extension can have Automatic Handsfree for
just outgoing calls or both outgoing calls and
incoming line/loop key calls. Automatic
Handsfree can also be used with the Call
Coverage or Park features. Normally, extensions
without speakerphones should have Automatic
Handsfree for outgoing calls only.
User can place a call without lifting the handset,
but must lift the handset to speak.
XEN Topaz
Features