Husqvarna FC 250 2018 Repair Manual page 289

CLEANING/PROTECTIVE TREATMENT
Push back the protection caps of the handlebar controls to
allow any water that has penetrated to evaporate.
After the motorcycle has cooled off, lubricate all moving parts
and bearings.
Clean the chain. (0
Treat bare metal parts (except for brake discs and the
exhaust system) with a corrosion inhibitor.
Preserving materials for paints, metal and rubber
(0 p. 301)
Treat all plastic parts and powder-coated parts with a mild
cleaning and care agent.
Special cleaner for glossy and matte paint finishes, metal
and plastic surfaces
p. 129)
(0 p. 301)
26
41
287