Husqvarna FC 250 2018 Repair Manual page 44

6 FORK, TRIPLE CLAMP
42
-
Tighten screws (3.
Guideline
Screw, bottom triple
clamp
-
Tighten screw
Guideline
Screw, top steering
head
-
Mount and tighten screw
Guideline
Screw, top
steering stem
-
Using a plastic hammer, tap lightly on the upper triple clamp
to avoid stresses.
-
Tighten screws@).
Guideline
Screw, top triple
clamp
-
Secure the wiring harness with cable holder
-
Mount indicator lamp holder.
Guideline
Remaining screws,
chassis
-
Position the brake caliper. Mount and tighten screws 41).
Guideline
Screw, front
brake caliper
-
Position the brake line and the clamp. Mount and tighten
4D.
screws
S01903-12
M8 12 Nm (8.9 lbf ft)
C,.
M20x1.5 12 Nm (8.9 lbf ft)
@.
M8 20 Nm (14.8 lbf ft)
M8 17 Nm (12.5 lbf ft)
10 Nm (7.4 lbf ft)
M6
25 Nm (18.4 lbf ft)
M8
®
Loctite 243
™
@)
on the left.
®
Loctite 243
™