•
I
6.20
Lubricating the steering head bearing
f@
U,
s
-
Tighten the shock absorber cartridge.
Guideline
Cartridge on the
outside fork tube
I Ring wrench (T14017)
-
Mount adjuster
and tighten the screw.
Guideline
Screw, compres
sion adjuster
Condition
Value not determined on removal:
-
Turn compression adjusting screw
adjusting screw
-
Turn counterclockwise by the number of clicks corre
sponding to the fork type.
Guideline
Compression damping
Comfort
Standard
Sport
Rebound damping
Comfort
Standard
Sport
-
Mount protection cap
Condition
Value determined on removal:
-
Turn compression adjusting screw
adjusting screw
-
Turn the adjusting screws to the position they were in
before removing.
-
Mount protection cap
-
Remove the lower triple clamp.
-
Install the lower triple clamp.
Info
The steering head bearing is cleaned and lubricated
in the course of removal and installation of the lower
triple clamp.
H02387-01
FORK, TRIPLE CLAMP 6
M51x1.5
50 Nm (36.9 lbf ft)
(8
p. 317)
0
of the compression damping. Mount
M4x0.5
1.5 Nm
(1.11 lbf ft)
Gi)
and rebound
48
clockwise all the way.
17 clicks
12 clicks
7 clicks
17 clicks
12 clicks
7 clicks
48.
Gi)
and rebound
48
clockwise all the way.
48.
p. 40)
(8
(8
p. 41)
...
...
39