Table of Contents
Advertisement
H02377-10
Checking the free travel of the hand brake lever (O�tion: Brembo)
Warning
The brake system fails in the event of overheating.
Danger of accidents
If there is no free travel on the hand brake lever, pressure builds up on the front brake circuit.
-
Set the free travel on the hand brake lever in accordance with the specification.
0
-
Check that spring plate
ing plate @ in the brake caliper bracket are seated cor
rectly.
-
Insert the new brake linings.
-
Mount pin Q).
0
✓ Spring plate
engages in the groove on the pin.
Info
•
I
Always change the brake linings in pairs.
C,.
-
Mount cotter pins
-
Operate the hand brake lever repeatedly until the brake
linings are in contact with the brake disc and there is a
pressure point.
-
Add brake fluid up to level f).
Guideline
Level f) (brake fluid level
below reservoir rim)
I Brake fluid DOT 4 / DOT 5.1
8
-
Position cover
with membrane (D.
-
Mount and tighten screws
Info
Clean up overflowed or spilled brake fluid immedi
ately with water.
BRAKE SYSTEM 16
in the brake caliper and slid
5 mm (0.2 in)
(a
p. 298)
O.
145
...
Advertisement
Table of Contents
