Removing The Fork Legs - Husqvarna FC 250 2018 Repair Manual

6 FORK, TRIPLE CLAMP
6.8
18

Removing the fork legs

S01903-10
Warning
Danger of accidents
discs reduces the braking effect.
-
Always keep the brake discs free of oil and
grease.
-
Clean the brake discs with brake cleaner when
necessary.
-
Clean and oil the dust boots and inner fork tubes of both fork
legs.
I Universal oil spray (8 p. 301)
Press the dust boots back into their installation position.
Remove excess oil.
Finishing work
Install the fork protector.
Remove the motorcycle from the lift stand.
Preparatory work
Raise the motorcycle with a lift stand.
Remove the front wheel.
Main work
O
Remove screws and take off the clamp.
8
Remove screws and take off the brake caliper.
-
Allow the brake caliper and brake line to hang loosely to the
side.
Info
Do not actuate the hand brake lever when the front
wheel is removed.
Loosen screws (5). Remove the left fork leg.
C,.
Loosen screws Remove the right fork leg.
Oil or grease on the brake
(!al p. 20)
(8 p. 12)
(0 p. 12)
(0 p. 118)
..