Table of Contents
Advertisement
4.3 Cleaning
To clean the device, wipe it gently with a soft cloth moistened
with water or mild detergent.
IMPORTANT
Never use solvents such as benzene, alcohol, acetone,
ether, ketones, thinners or gasoline, as they can deform
and discolor the case.
• Measurements are degraded by dirt on the facing
surfaces of the sensor head, so keep the surfaces
clean by gently wiping with a soft cloth.
• Before cleaning the facing surfaces on the
sensor head, discharge any static electricity that
may have built up on your hands by touching a
nearby metal object. In this way you can ensure
that a high voltage, for example caused by static
electricity, will not be applied to the device.
Application of a high voltage to the device may
damage the internal Hall elements or circuitry.
• Clean the vents periodically to avoid blockage.
If a vents becomes clogged, the devices internal
cooling is impeded, and damage may result.
CAUTION
Cleaning
63
Advertisement
Table of Contents
