Table of Contents
Advertisement
Product Specifications
Items
Maximum rated
current
Maximum peak
current
Output
sensitivity
Amplitude
accuracy
Output
resistance
Noise
46
Model SS-520
5 A rms (DC, and sine wave)
Derating according to frequency
(Representative characteristics: See Fig.3 and
4 (p. 50))
Note: Depending on the terminator ambient
temperature and measurement conditions,
an overload may be caused by internal
overheating, causing the maximum rated
current to be less than 5 A rms.
±7.5 A peak (non-continuous)
1 V/A
±3.0%rdg.±1 mV (typical ±1.0%rdg. ±1 mV)
(DC, and sine wave 45 to 66 Hz, 0 to 5 A rms)
Example representative waveform response
during 1 mA measurement: See Fig.5 (p. 51)
Note: The amplitude accuracy is not guaranteed
if the state, which includes scratches and
adhesion of foreign objects, of the mating
faces as well as an operating environment
change.
Ω
50
±10% (DC)
75 µA rms or less (typical 60 µA rms)
(for 30 MHz band measuring instrument)
Model SS-521
Advertisement
Table of Contents
