Preparation for Measurements
4
Press and hold the
AUTO ZERO
second.
Do not press the key
with excessive force.
Zero-adjustment will be
performed after demagnetization.
While performing demagnetization and zero-adjustment
The LED stops
flashing and light
up continuously.
After demagnetization and zero-adjustment complete
normally
The LED turns
off.
If the
instead of turning off when the
key is pressed, demagnetization and zero-adjustment
did not complete normally.
See "Demagnetization and zero-adjustment do not
complete normally." (p. 60).
40
DEMAG/
key for about 1
DEMAG/AUTO ZERO
LED continues flashing
DEMAG/AUTO ZERO