Table of Contents
Advertisement
Usage Notes
• To avoid damage to the output connector on
• Do not place foreign objects between the
• Do not apply a static electricity or other source of
• Do not short-circuit the output terminal and do not
• Note that the device may be damaged if the
14
the terminator or the BNC input terminal's
locking mechanism on the waveform measuring
instrument, do not rotate with both terminals
connected. Additionally, exercise care to ensure
that connections are not subject to stress.
mating faces of the sensor head, insert foreign
objects into the gaps of the sensor head, or
touch the mating faces. Doing so may worsen
the performances of the sensor or interfere with
clamping action.
high voltage to the sensor. Doing so may damage
its internal Hall elements and circuitry.
input voltage to the output terminal. The device
may be damaged.
applied current exceeds the measurement range.
CAUTION
Advertisement
Table of Contents
