Iwatsu SS-521 Instruction Manual page 35

2 Connect the device's output connector to the waveform
measurement instrument.
3
Press and hold the
(At this time, do not clamp the conductor being measured.)
Performing Measurements. (p. 41)
1
Clamp the device around the conductor being measured.
2 Lock the device's sensor head.
3
Observe the current waveform with a waveform
measurement instrument.
Finishing Measurements. (p. 43)
1
Remove the device from the conductor being measured.
2
Disconnect the device from the waveform measurement
instrument.
3
Turn the PS-54 or the PS-52 power switch off.
4
Disconnect the device's power plug from the PS-54 or PS-52.
DEMAG/AUTO ZERO
Measurement Workflow
key.
31