9.27
Checking the swingarm
9.28
Checking the swingarm bearing for �la}!
9 SHOCK ABSORBER, SWINGARM
Alternative 2
Warning
Danger of accident
pension setting may seriously alter the handling
characteristic.
Extreme modifications to the suspension setting
may cause a serious deterioration in the handling
characteristic and overload components.
-
-
-
Tension the spring to the amount measured during dis
mantling by turning the adjusting ring.
I Hook wrench (T106S)
-
Tighten screw
Guideline
Screw, shock
absorber adjusting
ring
201370-11
-
Check the swingarm for damage, cracking, and deformation.
If the swingarm shows signs of damage, cracking, or
deformation:
-
Change the swingarm.
•
I
Preparatory work
-
Raise the motorcycle with a lift stand.
-
Place a load on the front of the vehicle.
✓ The rear wheel is not in contact with the ground.
Modifications to the sus
Only make adjustments within the recom
mended range.
Ride slowly to start with after making
adjustments to get the feel of the new
handling characteristic.
(a
p. 367)
0.
M5
5 Nm (3.7 lbf ft)
Info
Always change a damaged swingarm. Repair
of the swingarm is not authorized by Husq
varna Motorcycles.
(a
p. 13)
..
75