Husqvarna FE 350 2016 Repair Manual page 88

10 EXHAUST
86
-
Lift the rear frame slightly and position the shock absorber.
-
Mount and tighten screw (D.
Guideline
Screw, top M10
shock absorber
-
Position the rear frame.
-
Mount and tighten screws
Guideline
Screw, sub­ M8
frame
0
-
Remove screws on both sides.
-
Mount and tighten screws
Guideline
Screw, sub­ M8
frame
(FE EU/AU, FE 350 US)
-
Lower the swingarm.
(FE 350 SUS)
-
Lower the swingarm.
-
Position the angle lever and linkage lever.
Mount and tighten screw cap (D.
Guideline
Nut, linkage lever on
angle lever
-
Mount and tighten screw@.
Guideline
Screw, bottom M10
shock absorber
60 Nm (44.3 lbf ft)
®
Loctite
C,
on both sides.
35 Nm (25.8 lbf ft)
®
Loctite
0
on both sides.
35 Nm (25.8 lbf ft)
®
Loctite
M 14x1 .5 80 Nm (59 lbf ft)
60 Nm (44.3 lbf ft)
®
Loctite
2701
TM
2701
TM
2701 TM
2701
TM