Husqvarna FE 350 2016 Repair Manual page 132

14 WHEELS
130
Main work
(FE EU/AU, FE 350 US)
O.
- Loosen nut
Loosen nuts @ .
-
- Adjust the chain tension by turning adjusting screws
left and right.
Guideline
Chain tension
Turn adjusting screws
the markings on the left and right chain adjusters are in
the same position relative to reference marks
rear wheel is then correctly aligned.
Tighten nuts @ .
-
- Make sure that chain adjusters
fD.
adjusting screws
O.
- Tighten nut
Guideline
Nut, rear wheel
spindle
• Info
I
The wide adjustment range of the chain adjusters
(32 mm (1.26 in)) enables different secondary
ratios with the same chain length.
Chain adjusters
(FE 350 SUS)
O.
- Loosen nut
Loosen nuts @ .
-
- Adjust the chain tension by turning adjusting screws
left and right.
Guideline
Chain tension
Turn adjusting screws
the markings on the left and right chain adjusters are in
the same position relative to reference marks
rear wheel is then correctly aligned.
Tighten nuts @ .
-
- Make sure that chain adjusters
fD.
adjusting screws
O.
- Tighten nut
Guideline
Nut, rear wheel
spindle
1 55 ... 58 mm (2.17 ...
2.28 in)
fD
on the left and right so that
O.
The
C,
are fitted correctly on
M20x1 .5 80 Nm (59 lbf ft)
C,
°
can be turned by 180 .
1 55 ... 58 mm (2.17 ...
2.28 in)
fD
on the left and right so that
O.
The
C,
are fitted correctly on
M20x1 .5 80 Nm (59 lbf ft)
fD
fD