Husqvarna FE 350 2016 Repair Manual page 141

Position spacer washer @.
(D
Press new bearing
the inside.
Info
Only press the bearing in via the outer ring oth­
erwise the bearing will be damaged when it is
pressed in.
-
Clean, grease, and mount spacing tube
I Long-life grease (Ii!:!
8
Press new bearing
the inside.
Info
Only press the bearing in via the outer ring oth­
erwise the bearing will be damaged when it is
pressed in.
-
Grease new shaft seal ring
flush.
8.
Mount lock ring
✓ The lock ring engages audibly.
Grease new shaft seal ring
flush.
Finishing work
Install the rear wheel. (Ii!:!
Remove the motorcycle from the lift stand.
all the way in from the outside to
0 .
p. 354)
all the way in from the outside to
CD
and press it in until it is
O
and press it in until it is
p. 126)
(Ii!:! p. 13)
14 WHEELS
139