Removing The Locking Lever; Removing The Force Pump - Husqvarna FE 350 2016 Repair Manual

18 ENGINE
18.3.23
18.3.24
192

Removing the locking lever

Removing the force pump

O
Unscrew and remove together with locking lever@,
washer, sleeve and spring.
O.
Remove lock ring
-
Take off washer@.
Take off oil pump idler gear
8.
Remove lock ring
0-
-
Take off washer
-
Take off oil pump gear wheel (D.
Remove pin@.
«D.
Remove screws
-
Take off the oil pump cover.
Remove pin@).
«&
Push oil pump shaft
from the alternator side.
41.
Remove force pump
(D
with the washer.
inward and take it out of the engine