Table of Contents
Advertisement
12 FUEL TANK, SEAT, TRIM
12.13
108
Removing the activated charcoal filter (FE 350 S US)
-
Select the
"Function test of fuel pump control"
test.
Guideline
Maximum duration of the
actuator test
-
Check the fuel pressure with the filler cap closed.
Fuel pressure
When the fuel pump is
active
If the specification is not reached:
-
Open the filler cap.
-
Check the tank air vent system.
-
Check the fuel pressure with the filler cap open.
Fuel pressure
When the fuel pump is
active
If the specification is not reached:
-
Check that the fuel line is clear.
-
Change the fuel filter.
-
Change the fuel pump.
-
Stop the
"Function test of fuel pump control"
by pressing the
"Quit"
button.
-
Remove the special tools.
-
Join the fuel hose connection.
Preparatory work
-
Remove the seat.
(�
p. 97)
-
Remove the fuel tank.
(�
Main work
O.
-
Detach rubber strap
-
Hang the activated charcoal filter to the side.
actuator
3 min
1
3.35 ... 3.65 bar (48.6 ...
52.9 psi)
(a
p. 95)
1
3.35 ... 3.65 bar (48.6 ...
52.9 psi)
(�
p. 103)
(�
p. 1 05)
actuator test
p. 98)
Advertisement
Table of Contents
