Table of Contents
Advertisement
Clamp the fork leg with the axle clamp.
Release hydrostop unit
Info
Do not use an impact wrench.
Place a pan underneath since oil will run out.
Remove the cartridge from the fork leg.
I
Pressing tool (T14051)
Info
Removing the O-ring seat from the cartridge usually
requires the application of considerable force.
Remove dust boot (D.
Remove fork protector ring f).
Info
The fork protector ring does not necessarily need to
be removed for repair work.
B03520-14
Remove lock ring @.
Info
The lock ring has a beveled end where a screwdriver
can be applied.
Warm up the outer tube in area G) of the lower sliding bush
ing.
1
Guideline
so
c
(122 °F)
0
Pull the outer tube from the inner tube with a jerk.
Info
Lower sliding bushing
B03528-13
bearing seat.
6 FORK, TRIPLE CLAMP
0
and remove it.
(�
p. 371)
@)
must be pulled from its
21
Advertisement
Table of Contents
