Husqvarna FE 350 2016 Repair Manual page 143

15 WIRING HARNESS, BATTERY
Tip
Replace the spare fuse in the fuse box so that it is
available if needed.
-
Check that the power consumer is functioning properly.
-
Close the fuse box cover.
(FE 350 SUS)
-
Open fuse box cover
-
Remove the defective fuse.
Guideline
Fuse - 10 A - EFI control unit
1
Fuse 2 - 10 A- fuel pump
Fuse 3 - 10 A - ignition
Fuse - 10 A - high beam, low beam, parking light, tail
4
light, license plate lamp, horn, brake light, turn signal,
radiator fan
- 1 0 A - spare fuses
Fuses
res
Info
e.
You can recognize a faulty fuse by a burned-out
fuse wire
Warning
Fire hazard
cal system.
-
Only use fuses with the required ampere
value.
-
Do not bypass or repair fuses.
-
Use spare fuses with the correct rating only.
I Fuse (75011088010)
Tip
Replace the spare fuse in the fuse box so that it is
available if needed.
-
Check that the power consumer is functioning properly.
-
Close the fuse box cover.
Finishing work
-
Mount the seat. (!:;! p. 97)
O.
Incorrect fuses overload the electri­
(l!l.:! p. 281)
141