Husqvarna FE 350 2016 Repair Manual page 69

e
/
201418-10
9 SHOCK ABSORBER, SWINGARM
C,
Mount rebound washer with the cut-out facing down­
ward.
Mount the compression shim stack
shims facing downward.
(D
Sand both sides of piston
grit sandpaper.
Clean the piston.
Assemble the piston.
Guideline
Viewf)
View@)
Mount the rebound shim stack @ with the smaller shims
facing upward.
fD
Mount washer with the collar facing downward.
0
with the smaller
on a surface plate using 1200-
Piston from above
Piston from below
67