Husqvarna FE 350 2016 Repair Manual page 45

Main work
(FE EU/ AU, FE 350 US)
O.
-
Loosen screws Remove screw
Loosen and retighten screw
Guideline
Screw, top steering
head
-
Using a plastic hammer, tap lightly on the upper triple
clamp to avoid stresses.
O.
-
Tighten screws
Guideline
Screw, top triple
clamp
-
Mount and tighten screw
Guideline
Screw, top MB
steering stem
(FE 350 SUS)
O.
-
Loosen screws Remove screw
-
Loosen and retighten screw
Guideline
Screw, top steering
head
-
Using a plastic hammer, tap lightly on the upper triple
clamp to avoid stresses.
O.
-
Tighten screws
Guideline
Screw, top triple
clamp
-
Mount and tighten screw
Guideline
Screw, top MB
steering stem
Finishing work
-
Check the play of the steering head bearing.
-
Remove the motorcycle from the lift stand.
6 FORK, TRIPLE CLAMP
8.
@).
M20x1 .5 12 Nm (8.9 lbf ft)
MB 17 Nm (12.5 lbf ft)
8.
17 Nm (12.5 lbf ft)
®
Loctite 243
8.
@).
M20x1 .5 12 Nm (8.9 lbf ft)
MB 17 Nm (12.5 lbf ft)
8.
17 Nm (12.5 lbf ft)
®
Loctite 243
(a p. 40)
(a p. 13)
™
™
43