Husqvarna FE 350 2016 Repair Manual page 272

23 CYLINDER HEAD
270
m.
Remove screw
-
Crank the engine several times.
-
Check the valve clearance and correct it if necessary.
Mount and tighten screw
Guideline
Screw plug,
crankshaft location
Mount and tighten screw
Guideline
Screw, alternator
cover
-
Clean and degrease the sealing surface.
-
Apply a thin layer of sealant to area (!).
Loctite 5910
®
@).
Mount gasket
Pivot the radiator forward slightly on the right.
Position the valve cover with the gasket. Mount and tighten
screws@).
Guideline
I Screw, valve cover
Mount the vent hose and hose clamp @.
m
48.
with washer
M8 10 Nm (7.4 lbf ft)
4D.
M24x1.5 18 Nm (13.3 lbf ft)
M6 1 B Nm (5.9 lbf ft)