15 WIRING HARNESS, BATTERY
(FE 350 SUS)
-
While the engine is idling, turn the key in the ignition lock
to the position (5Q_
Remove the seat.
(�
p. 97)
Main work
Disconnect the negative cable of the battery.
Measure the current between battery ground (-) and the neg
ative cable.
Info
The value of the open-circuit current only applies to
vehicles in their original state without additional power
consumers.
Maximum open-circuit cur
I
rent
If the measured value is greater than the specified value:
Disconnect the voltage regulator from the wiring har
ness and perform the measurement again.
<
1.0 mA
I
147
..