Closing The Filler Cap; Removing The Right Side Cover; Installing The Right Side Cover - Husqvarna FE 350 2016 Repair Manual

12 FUEL TANK, SEAT, TRIM
96
Closing the filler ca�
S00909-11
(EU)
Mount the filler cap and turn clockwise until the release
O
button locks in place.
Info
Run the fuel tank breather hose @} without kinks.
(FE AU, FE US)
-
Mount the filler cap and turn clockwise until the release
O
button locks in place.
Info
Run the fuel tank breather hose @} without kinks.
O.
-
Remove screw
-
Pull off the side cover in area f) sideways and remove it
toward the rear.
-
Position the side cover and engage in area f) .
-
Mount and tighten screw
Guideline
Remaining screws,
chassis
O.
M6 10 Nm (7.4 lbf ft)
411
411
411