Table of Contents
Advertisement
P a c k i n g f o r S h i p m e n t
Introduction
Returning the N-550B
General Instructions
Repacking in Original Carton
N-550B
To ship the N-550B, for any reason, follow the instructions in this section.
Contact Nellcor's Technical Services Department or your local Nellcor
representative for shipping instructions including a Returned Goods
Authorization (RGA) number. Unless otherwise instructed by Nellcor's
Technical Services Department, it is not necessary to return the sensor or
other accessory items with the N-550B. Pack the N-550B in its original
shipping carton. If the original carton is not available, use a suitable carton
with appropriate packing material to protect it during shipping.
Return the N-550B by any shipping method that provides proof of delivery.
Pack the N-550B carefully. Failure to follow the instructions in this section
may result in loss or damage not covered by any applicable Nellcor warranty.
If the original shipping carton is not available, use another suitable carton.
Prior to shipping the N-550B, contact your supplier or local Nellcor office
(Technical Services Department) for a RGA number. Mark the shipping
carton and any shipping documents with the RGA number. Return the
N-550B by any method that provides proof of delivery.
If available, use the original carton and packing materials. See Figure 43.
Pack the N-550B as follows:
75
Advertisement
Table of Contents
