Figure 9-16 Removing The Audio Cable From The Audio Module - Sun Microsystems SPARCstation 4 110 Service Manual

6. Disconnect the audio cable from the connector on the Audio Module.
Gently pull the audio cable from underneath the Audio Module metal shield,
ensuring that the audio cable connector does not snag on any Audio Module
component. See
Cable slot
Metal
shield
FIGURE 9-16
7. From the system board, disconnect the power supply cable, the SCSI cable, and
the diskette drive cable (if present).
.
FIGURE 9-16
Removing the Audio Cable From the Audio Module
Retaining hooks
Audio cable
connector
Chapter 9 Storage Devices 9-19