Sun Microsystems SPARCstation 4 110 Service Manual page 164

2. Halt the operating system.
See the documentation supplied with your operating system for instructions on how
to halt it.
a. For Solaris 2.x (SunOS 5.x) systems, type:
% su
Password: superuser password
# /usr/sbin/shutdown -y -g60 -i0
b. For Solaris 1.x (SunOS 4.x) systems, type:
% su
Password: superuser password
# /usr/etc/shutdown -h +1
The operating system warns other users of your system of the impending
shutdown, and then halts itself after a one-minute delay. If you wish to provide a
longer delay, see the man page for shutdown(1).
The system synchronizes the file systems and brings you to the ok prompt.
3. Enter
4. When you see the system banner, press Stop-a to access the FORTH Monitor.
5. Enter
Diagnostics.
6. Enter the name of the test you wish to execute.
D-2 SPARCstation 4 Model 110 Service Manual • July 1996
at the ok prompt.
reset
at the ok prompt to get a list of tests that comprise the FORTH
help diag