FIGURE 11-13
2. Align the Audio Module with its opening on the system back panel.
See
FIGURE 11-14
corresponding slot on the system back panel.
3. Align the Audio Module connector with its corresponding connector on the
system board.
The corresponding connector on the system board is the one that is closer to the
system back panel. See
4. Push down slowly and evenly until the Audio Module is connected to the system
board.
11-12
SPARCstation 4 Model 110 Service Manual • July 1996
Removing the Audio Module Filler Panel
. Hold the module by its edges and insert its central tab into the
FIGURE 11-8
.