Diskette Data Cable; Removing The Diskette Data Cable - Sun Microsystems SPARCstation 4 110 Service Manual

7. Detach the wrist strap and replace the cover.
See Chapter 7.
8. Power on the system.
See Section 6.2 "Powering On the System" on page 6-4.
9.6

Diskette Data Cable

9.6.1

Removing the Diskette Data Cable

1. Shut down and power off the system.
See Section 6.1 "Powering Off the System" on page 6-1.
2. Remove the cover and attach a wrist strap.
See Chapter 7.
3. Remove the CD-ROM drive (if present).
See Section 9.2.1 "Removing the CD-ROM Drive" on page 9-5.
4. Unplug the diskette data cable from the diskette drive and from the system board.
5. Note how the diskette data cable is routed, and then carefully remove it from the
chassis.
See
FIGURE 9-14
9-16 SPARCstation 4 Model 110 Service Manual • July 1996
.