Sun Microsystems SPARCstation 4 110 Service Manual page 129

2. Remove the cover and attach a wrist strap.
See Chapter 7.
3. Place an antistatic surface next to the system.
4. Locate the only VSIMM slot.
See .
FIGURE 11-23
Rear Panel
VSIMM Slot Location
FIGURE 11-23
5. To eject the faulty VSIMM, press down on the ejection levers on both sides of the
VSIMM connector.
See .
FIGURE 11-24
Chapter 11 System Board and Component Replacement
VSIMM slot
11-21