9.4
CD-ROM SCSI Cable
9.4.1
Removing the CD-ROM SCSI Cable
1. Shut down and power off the system.
See Section 6.1 "Powering Off the System" on page 6-1.
2. Detach all external cables from the rear panel except the power cord.
3. Remove the cover and attach a wrist strap.
See Chapter 7.
4. Unplug the SCSI data connector (P1), from the system board.
Metal cable clips
SCSI data connector
FIGURE 9-12
5. Remove the CD-ROM drive.
See Section 9.2.1 "Removing the CD-ROM Drive" on page 9-5.
6. Free the CD-ROM SCSI cable, and carefully remove it from the chassis.
See
FIGURE 9-12
System Board Cable Connections
.
CD-ROM
SCSI cable
Chapter 9
Storage Devices
9-13