6. Unlock the Audio Module retainers.
Push back the lower card retainers to release the Audio Module.
Unlocking the Audio Module
FIGURE 11-10
7. Insert a card extractor into the holes on the installed Audio Module.
See
.
FIGURE 11-4
8. Hold both ends of the card extractor. Pull upward slowly and evenly until the
Audio Module is disconnected.
Caution – Lift up evenly on both sides of the Audio Module to avoid any damage
to the connector pins.
9. Holding the connector end of the Audio Module, disengage the Audio Module
from its opening on the system back panel.
Hold the module by its edges and remove its central tab from the corresponding slot
on the system back panel.
Lift module up.
Unlock module.
Chapter 11
System Board and Component Replacement
11-9