Remote Security Management - Compaq Deskpro AP500 Reference Manual

Figure 3-5. Keyboard lights

Remote Security Management

Remote Security Management allows the system administrator to safely set or
modify security features on remote Compaq workstations, directly from the
centralized network management console. Enabling the system administrator to
perform these tasks remotely, on multiple workstations, results in consistent
deployment of and greater control over workstation security parameters over
the network. It also results in greater productivity and lower total cost of
ownership.
NOTE: Your workstation must be powered on, or turned on through Remote
Wakeup, to take advantage of Remote Security Management. Use of Remote
Security Management also requires an established Setup Password.
Remote Security Management is performed in two stages:
1. The system administrator uses the Remote Management Setup software
on a centralized management console to define the security parameters.
2. The system administrator uses a PC LAN management product to
distribute the settings over the network to remote Compaq workstations.
For more information about the Remote Management Setup software and
enabling Remote Security Management, refer to the online Remote
Management Administrators Guide. The Remote Management Administrators
Guide is included with the Remote Management Administration Tools, and is
available in the Support Software CD Kit or at the Compaq website
www.compaq.com.
Writer: Jeff Parmenter Project: Compaq Professional Workstation AP500 Reference Guide Comments: 338521-002
File Name: D-CH03.DOC Last Saved On: 2/11/99 8:20 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
3
2
1
Compaq Professional Workstation AP500 Reference Guide
3-25