Processors; Installing An Additional Pentium Ii Processor - Compaq Deskpro AP500 Reference Manual

Chapter 10

Processors

This chapter explains how to install an additional processor and how to upgrade
an existing processor.
For information on preparing the workstation for upgrades, see Chapter 6.
Installing an Additional Pentium II
Processor
You can upgrade the workstation to a multi-processor system by installing a
second Pentium II processor of the same speed and type in the second processor
slot.
To install a second Intel Pentium II processor:
1. Turn off the workstation and disconnect the power cord from the
grounded AC outlet and the back of the workstation.
2. Remove the following components:
side access panel
expansion board assembly
Writer: Jeff Parmenter Project: Compaq Professional Workstation AP500 Reference Guide Comments: 338521-002
WARNING: To reduce the risk of personal injury from hot
surfaces, allow the internal system components to cool before
touching.
CAUTION: Installing the processor incorrectly may cause damage
to the system board. Compaq recommends that you have a
Compaq authorized reseller or service provider install the
processor. If you plan to install it yourself, read all the instructions
carefully before you begin.
File Name: K-CH10.DOC Last Saved On: 1/26/99 3:06 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Compaq Professional Workstation AP500 Reference Guide
10-1