Remote Security Management; Remote Wakeup And Remote Shutdown - Compaq Deskpro Workstation AP240 Reference Manual

Remote Security Management

Remote Security Management allows the system administrator
to safely set or modify security features on remote Compaq
Deskpro Workstations, directly from the centralized network
management console. Enabling the system administrator to
perform these tasks remotely, on multiple workstations, results
in consistent deployment of and greater control over Deskpro
Workstation security parameters over the network. It also
results in greater productivity and lower total cost of ownership.
For more information about the Remote Management Setup
software and enabling Remote Security Management, refer to
the online Remote Management Administrators Guide. The
Remote Management Administrators Guide is included with the
Remote Management Setup Utilities, and is available on the
Support Software CD for Compaq Desktop, Portable, and
Workstation Products or at the Compaq Web Site at
www.compaq.com.

Remote Wakeup and Remote Shutdown

If your workstation has an optional network card installed, it
may support the Compaq Remote Wakeup and Remote
Shutdown functions. These functions allow a system
administrator to power on and power off a client workstation
from a remote location, supported by PC LAN management
tools.
Your workstation must be powered on, or turned on
through Remote Wakeup, to take advantage of Remote
Security Management. Use of Remote Security
Management also requires an established setup password.
Third-party software tools are required to remotely
distribute software.
Reference Guide 3-21