Cable Lock Provision - Compaq Deskpro AP500 Reference Manual

3-18 Intelligent Manageability

Cable Lock Provision

The cable lock provision consists of a two-piece security bracket. The bottom
part of the bracket is attached to the workstation with a screw; the top part of
the bracket covers the screw and prevents its removal.
NOTE: The security bracket can be used with a padlock to inhibit access to
the interior of the workstation, which prevents unwanted configuration
changes or component removal. For increased security, a cable lock can be
installed to secure the workstation to a fixed object.
To install the security bracket:
1. Separate bracket A and bracket B by bending the metal back and forth
where the two pieces join.
Figure 3-2. Separating the security brackets
2. Insert the tab on bracket A into the notch on the rear of the workstation
until the bracket is positioned flat against the side access panel.
3. Align the hole on the flat portion of bracket A with the screw hole on the
side access panel.
Writer: Jeff Parmenter Project: Compaq Professional Workstation AP500 Reference Guide Comments: 338521-002
B
File Name: D-CH03.DOC Last Saved On: 2/11/99 8:20 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
A