Country-Specific Requirements - Compaq Deskpro AP500 Reference Manual

C-2 Power Cord Set Requirements

Country-Specific Requirements

Use the following table to identify the appropriate accredited agency in your
country.
Country
Australia
Austria
Belgium
Canada
Denmark
Finland
France
Germany
Italy
Japan
Norway
Sweden
Switzerland
United Kingdom
United States
Notes:
1. Flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 1.0 mm
size. Power cord set fittings (appliance coupler and wall plug) must bear the
certification mark of the agency responsible for evaluation in the country where it
will be used.
2. Flexible cord must be Type SVT or equivalent, No. 18 AWG, 3-conductor. Wall
plug must be a two-pole grounding type with a NEMA 5-15P (15A, 125V).
3. Appliance coupler, flexible cord, and wall plug must bear a "T" mark and
registration number in accordance with the Japanese Dentori Law. Flexible cord
must be Type VCT or VCTF, 3-conductor, 1.0 mm
be a two-pole grounding type with a Japanese Industrial Standard C8303 (7A,
125V) configuration.
Writer: kmosby Project: Compaq Professional Workstation AP500 Reference Guide Comments: 338521-002
Table C-1
Power Cord Set Requirements - By Country
Accredited Agency
EANSW
OVE
CEBC
CSA
DEMKO
SETI
UTE
VDE
IMQ
JIS
NEMKO
SEMKO
SEV
BSI
UL
File Name: O-APPC.DOC Last Saved On: 12/14/98 12:10 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Applicable Note Numbers
1
1
1
2
1
1
1
1
1
3
1
1
1
1
2
2 conductor
2 conductor size. Wall plug must