Pulse Pursuit 240F Assembly Instructions Manual page 6

5
6
(5) Attach the handle bars to the
main frame using the handle
bar bolts, making sure that the
heart rate sensor wire passes
through the large hole as
shown and appears at the top
of the frame. Ensure the bolts
are tight and secure.
(6) Split the console in halve, by
taking out the 2 screws in the
bottom halve.Then insert the
bottle cage from the rear and
secure with the bottle cage
nuts. Ensure the nuts are tight
and secure.
Tools Required -
1 x 6mm Allen Key.
1 x Philips Head Screwdriver.
1 x 10mm Spanner.
6