Programme Selection, Control & Data Entry Buttons - Pulse Pursuit 240F Assembly Instructions Manual

5.8
A
(A)
(B)
B
(C)
(D)
C
(E)
D
E
Programme Selection, Control and Data Entry Buttons
The programme selection, control and data entry buttons provide the means of selecting, starting and stopping
exercise programmes, and entering operational parameters such as duration, difficulty (effort), target heart rate,
etc. In general, the buttons perform the following functions:
Buttons for general selection and entering numerical data when requested.
Press the START button to begin the selected exercise programme.
Press the STOP button to stop an exercise programme at any time. Press a second time to return to the mode
selection display.
NOTE: The STOP button also acts as a clear button if you enter a mistake.
Press ' + ' to increase or ' - ' to decrease the effort needed to turn the pedals.When exercising in Circuit mode,
these buttons enable you to change gear.
The Information button enables you to access the Help and Options screen, which allows you three options;
(a) The Units Button allows the cycle to be switched between, MPH/kCal, KPH/kCal and KPH/kJ.
(b) The Language Button enables you to switch between languages.
(C) The Zoom Button allows you to have either the Speed, Distance,Time, Power or Heart Rate enlarged on
the LED screen for easy viewing when exercising.The Zoom feature can also be switched off if required.
The Cardio Theater button enables you to switch the Audio channel and alter the volume, before or whilst exercising.
24