Table of Contents
Advertisement
A
B
C
D
E
AA
1
2
3
CAUTION: Seek professional advice prior to use.
Fitlinxx
Do not continue if you feel faint, dizzy or exhausted.
START
STOP
4.4
Language Option, Maximum Time & Contrast Parameters
4
CAUTION
5
To alter these options you have to enter Test Mode, it is
6
absolutely critical that when in Test Mode you only alter
the settings for these options, adjusting any other
settings could result in terminal failure of the cycle.
Whilst the machine is switched off press and hold the Stop button,then switch the
machine on. Or,when in Menu Mode,type the console buttons in the order of 3,1,
4,1,5 as numbered opposite in AA.
(A)
The Test Mode screen will appear,(press Start)
(B)
Select Configure.
(C)
Using the + and - buttons scroll through screens until you get to"Lang"followed by a
three digit number.Change the number to obtain one of the following
languages;
001=English, 002=German, 003=Swedish,or
001=French, 002=Spanish, 003=Italian,(depending on software version) this will
set the desired default language,then press Start to enter the required setting.
Alternatively,press the information button,press language,then select the desired
language,(see Section 4.7).
(D)
The Maximum session time screen is "Max T"alter the time to between 15 and 90
minutes,then press Start to enter the required setting.
(E)
The Contrast Parameters screen is "LCD C"alter the setting to between 1 and 9,then
press Start to enter the required setting,(Level 1 is the lightest setting and 9 is the
darkest).
NOTE: The LCD display will not alter until the machine has been switched off and
on again.
Once all settings have been made switch off,then switch on the machine to resume
normal procedure.
18
Advertisement
Table of Contents
