Table of Contents
Advertisement
11
12
13
14
12
(11)
Place the bottom halve of the
console onto the frame and
secure with the console bolts.
NOTE: Fasten Bolts securely.
(12)
Place the top halve of the
console onto the bottom halve.
Carefully pull the electrical
connectors up from the frame.
Ensure that all the electrical
connectors attach to the circuit
board as shown, (Also see wiring
diagram located in column).
Failure to do so may result in
damaging the machine or risk of
injury.
(13)
Carefully lower the top console
into place and secure with the
console screws.
NOTE: Fasten Screws securely.
(14)
Finally plug in the external
power supply box, then connect
the mains power cable.
Tools Required -
1 x 4mm Allen Key.
1 x Philips Head Screwdriver.
Your 250F Cycle is now ready to
use, READ this booklet to
become familiar with all
operational and safety features
before use.
Advertisement
Table of Contents
