Operating Modes - AGFA CR 35-X User Manual

CR 35-X D
IGITIZER

Operating modes

The CR 35-X can be operated in three modes: operator mode, key-operator
mode, and service mode.
Operator mode
The operator mode groups all basic functions which are aimed at
radiographers:
•
Reading an image plate;
•
Reading an emergency image plate;
•
Re-erasing an image plate;
•
Reading the identification data of a cassette (Dedicated configuration only);
•
Changing the image plate type (Dedicated configuration only).
All functions of the operator mode are described in
('Operator
Key-operator mode
The key-operator mode groups advanced functions which are aimed at
technicians.
The key-operator mode can be accessed via the Key-operator key on the
keypad and is menu-driven. The key-operator functions are described in
Chapter 3, 'Advanced operation ('Key-operator
Service mode
The service mode functions are reserved for trained service personnel. They
are password protected.
20
Operating modes
mode')'.
Chapter 2, 'Basic operation
mode')'.
4454C EN 2013-05-14