AGFA CR 35-X User Manual page 33

2 Type of message
3 Extra comment or action to take
4 System status:
• READY: The CR 35-X is ready for operation.
• BUSY: The CR 35-X is treating an image plate.
• ERROR: An error has occurred. Refer to
• LOCKED: id.
• WARNING: id.
5 Operation mode:
• [blank]: Normal operation mode.
• EMERGENCY: Emergency function for image plates with ID data.
• EMERGENCY BUTTON: Emergency function for image plates without ID data.
• ERASURE: Re-erasure function.
• DIRECT ID: Operation in dedicated configuration.
6 Error status: service code (SERVICE XXXXX) or error code (CODE XXXXX)
7 Station name of the CR 35-X
Identifier of image plate being treated:
8.1 After image ID data is read;
8.2 During scanning of image plate and transmittal of image data;
8.3 During transmittal of image data to image processing station.
The operator main screen is:
When the CR 35-X is treating an image plate, it displays the following screen:
Miller
4454C EN 2013-05-14
'Troubleshooting checklist'
READY
BUSY
Chest AP
CR 35-X D
IGITIZER
on page 65.
33
The user interface