AGFA CR 35-X User Manual page 36

CR 35-X D
IGITIZER
Audio signals
The CR 35-X gives status information via beeps. The length of the beep
indicates the response of the system to a key command.
•
A short beep means that CR 35-X has accepted the key command and is starting
the operation.
•
A long beep means that you have pressed a non-active key or that the CR 35-X
has rejected the key command.
•
An interval beep accompanies an error, locked or warning message. Refer to
'Troubleshooting checklist'
36
The user interface
on page 65.
4454C EN 2013-05-14